Select a Rack Configuration for Onsite
Racking
In the
Rack
section of the Order VMware Cloud on
Dell EMC SDDC
form, you can specify a rack configuration, which complies
with any of your certified onsite racks that you want to use for reracking. However, the rack that you want to
use must meet one of the following minimum depth requirements:
- Minimum 36 inches to maximum 41 inches
- Minimum 42 inches to maximum 46 inches
- 47 inches and more
After you place the order, the rack
is built based on your specifications and shipped to your location. The hardware
components are then removed from the rack and reloaded on your onsite
rack.
- Log in to the VMware Cloud Services Console at https://console.cloud.vmware.com/csp/gateway/discovery.
- Launch theVMware Cloud on Dell EMCservice.
- Expand your SDDC and clickContinue Order.The SDDC order form opens at the section where you last left.
- UnderSelect SDDC deployment type, select theOrder a VMware Cloud on Dell EMC Configuration to be racked onsite onto your certified rackcheck box.
- UnderSelect an on-site racking model, provide the following information:
- Model Depth: Select the onsite rack depth.
- Rack Model (Optional): Provide the name and number of the existing rack model.
- Special Instructions (Optional): Provide any special instructions pertaining to the rack.
- UnderSelect a rack configuration, review the rack configurations, and select one of the following:
- Single-phase configuration
- Three-phase configuration
- Power Source Location: Select Ceiling or Floor based on where your power source is located.If the distance between the power source location and your hardware is more than four feet, you must provide an extension cord.
- Physical requirements: Review the physical and logical requirements of your onsite rack.
- Select theI have read and acknowledge the needed requirements and conditions for my onsite rack deploymentcheck box.
- UnderData center space requirements, review and confirm that you meet the rack requirements at your location by selecting following the check boxes:
- Certified rack space
- Power
- Environment
- ClickSave and Continue.