VMware Aria Operations for Networks 6.13

6.14 6.13 6.12 6.11 6.10
简体中文 Deutsch Español Français 日本語 한국어 繁體中文 English

Create Clusters

You can create clusters from the
Settings
Infrastructure and Support
Infrastructure and Updates
 page.

Prerequisites

At least two additional platforms are required. The additional platform VMs should be deployed and powered on.

To create cluster

  1. Click
    CREATE CLUSTER
     for
    Platform VMs
    .
  2. On the
    Create Cluster
     page, enter the following information:
    • IP Address
      : Enter the IP address of the new platform that you want to add.
      VMware Aria Operations for Networks
       supports both IPv4 and IPv6 addresses.
    • Password
      : Enter the support user password of the platform VM. If you have not changed the password yet, then refer the
      Default Login Credentials
       section in
      VMware Aria Operations for Networks
       Installation Guide
       for the password.
  3. To keep adding more platforms, click
    Add more
     and enter the IP address and the support user password.
  4. Click
    SUBMIT
    . Click
    Yes
    .
  5. After creating a cluster, the user needs to log in to the product again.
  • The
    CREATE CLUSTER
     option is enabled only when the platform is of large brick size. All platforms should be of large brick to create cluster.
  • Enabling telemetry on a single node enables it on all the nodes.
  • To expand clusters, refer the
    Expanding a Cluster
     section in the
    VMware Aria Operations for Networks
     Installation Guide
    .

Content feedback and comments