Arista Hardware VTEP VM-VM Path
In
VMware Aria
Operations for Networks
, you can view a
hardware VTEP in the VM-VM path. Currently,
VMware Aria
Operations for Networks
supports the
following scenarios:- VM-VM path through hardware VTEP when the source and the destination VMs are located in a different VXLAN and a different host.
- VM-VM path through hardware VTEP when the source and the destination VMs are located in the same host but different VXLAN.
- Hardware VTEP in the VM underlay topology when the switch is directly connected to the host.
When you add the Arista Switch
SSH in
VMware Aria
Operations for Networks
as a data
source, you must use the same IP/FQDN that you have used in the VMware NSX Manager
to configure Arista Switch SSH. Otherwise, you do not see the hardware VTEP in the
VM-VM path.You can also view the hardware VTEP in VM
topology and in the VM to Internet path if a hardware VTEP is available between the VM
and Internet.
VM-VM path through the hardware VTEP when the
source and destination VMs are located in the same VXLAN is unsupported.
Here are a few examples of VM-VM path through
hardware VTEP:
