Invalid Response from Data Source

VMware Aria Operations for Networks

collector was unable to process the information received from the Data Source as the information was not in the expected format.

In some data providers this problem is observed intermittently and might go away in the next polling cycle. If it occurs consistently, contact support.

Data Source is not reachable from collector VM

Data source IP address on SSH/REST (port 22 or 443) is either not reachable from the

VMware Aria Operations for Networks

collector VM or the data source is not responding. This error occurs while adding the data source.

Verify connectivity to the data source from

VMware Aria Operations for Networks

collector VM on port 22 or 443. Make sure data source is up and running and the firewall is not blocking connection from

VMware Aria Operations for Networks

collector VM to the data source.

No NSX Controller found

An NSX Controller has been selected in the NSX Manager data source page but there is no NSX Controller installed.

Install an NSX Controller on NSX Manager and then select NSX Controller check box on the NSX Manager data source page.

Data source type or version mismatch

Provided data source IP Address/FQDN is not of selected data source type.

Verify that provided data source IP Address/FQDN is of selected data source type and version is supported by

VMware Aria Operations for Networks

t

Error connecting to data source

VMware Aria Operations for Networks

collector VM is unable to connect to the data source. This error occurs after adding the data source.

Verify connectivity to the data source from

VMware Aria Operations for Networks

collector VM on port 22 or 443. Make sure that the data source is up and running and firewall is not blocking connection from

VMware Aria Operations for Networks

collector VM to the data source.

Not found

VMware Aria Operations for Networks

collector VM is not found.

Check if pairing is done between

VMware Aria Operations for Networks

collector VM and

VMware Aria Operations for Networks

Platform VM.

Insufficient privileges to enable IPFix

The user who is trying to enable IPFIX in vCenter does not have the required privileges.

Provide adequate privileges to the user. For more information, see Add VMware vCenter Server.

IP/FQDN is invalid

The IP/FQDN provided on the data source page is not valid or does not exist.

Provide valid IP/FQDN address.

No data being received

VMware Aria Operations for Networks

Platform VM is not receiving data from

VMware Aria Operations for Networks

collector VM for that data source.

Contact Support.

Invalid credentials

Provided credentials are invalid.

Provide the correct credentials.

Connection string is invalid

The IP/FQDN provided on data source page is not in proper format

Provide valid IP/FQDN address.

Recent data may not be available, due to processing lag

VMware Aria Operations for Networks

Platform VM is overloaded and lagging behind in processing data.

Contact support.

Request timed out, please try again

VMware Aria Operations for Networks

could not complete request in specified time.

Try again. If the issue is not fixed, then contact support.

Failed for unknown reason, please retry or contact support

Request failed for some unknown reason.

Try again. If the issue is not fixed, then contact support.

Password authentication for SSH needs to be enabled on device

SSH login using password is deactivated on the device added

Enable password authentication for SSH on the device being added for monitoring.

SNMP connection error

Error connecting to the SNMP port

Verify if SNMP is configured correctly on the target device.