VMware vSphere SDKs and Tools 6.7

8.0 7.0 6.7 6.5

Listing and Setting iSCSI Options with vicfg-iscsi

You can use
vicfg-iscsi
 information retrieval options to list external HBA properties, information about targets, and LUNs.
You can use the following
vicfg-iscsi
 options to list iSCSI parameters. Specify one of the options listed in Connection Options for vCLI Host Management Commands in place of
<conn_options>
.
  • Run
    vicfg-iscsi -P|--phba
     to list external (vendor-specific) properties of an iSCSI adapter. 
    vicfg-iscsi <conn_options> -P -l <adapter_name>
vicfg-iscsi <conn_options> --phba --list <adapter_name>
    The system returns information about the vendor, model, description, and serial number of the HBA.
  • Run
    vicfg-iscsi -T | --target
     to list target information. 
    vicfg-iscsi <conn_options> -T -l <adapter_name>
vicfg-iscsi <conn_options> --target --list <adapter_name>
    The system returns information about targets for the specified adapter, including the iSCSI name, in IQN or EUI format, and alias. See Discovery Target Names.
  • Run
    vicfg-iscsi -L|--lun
     to list LUN information. 
    vicfg-iscsi <conn_options> -L -l <adapter_name>
vicfg-iscsi <conn_options> --lun --list <adapter_name>
    The command returns the operating system device name, bus number, target ID, LUN ID, and LUN size for the LUN.
  • Run
    vicfg-iscsi -L with -t
     to list only LUNs on a specified target. 
    vicfg-iscsi <conn_options> -L -l -t <target_ID> <adapter_name>
vicfg-iscsi <conn_options> --lun --list --target_id <target_id> <adapter_name>
    The system returns the LUNs on the specified target and the corresponding device name, device number, LUN ID, and LUN size.
  • Run
    vicfg-iscsi -p|--pnp
     to list physical network portal information for independent hardware iSCSI devices. You can also use this option with
    --mtu
    . 
    vicfg-iscsi <conn_options> -p -l <adapter_name>
vicfg-iscsi <conn_options> --pnp --list <adapter_name>
    The system returns information about the MAC address, MTU, and current transfer rate.
  • Run
    vicfg-iscsi -I -l
     to list information about the iSCSI initiator.
    systems use a software-based iSCSI initiator in the VMkernel to connect to storage. The command returns the iSCSI name, alias name, and alias settable bit for the initiator. 
    vicfg-iscsi <conn_options> -I -l vmhba42
  • Run
    vicfg-iscsi -p -M
     to set the MTU for the adapter. You must specify the size and adapter name. 
    vicfg-iscsi <conn_options> -p -M <mtu_size> <adapter_name>
vicfg-iscsi <conn_options> --pnp --mtu <mtu-size> <adapter_name>

Content feedback and comments