Avi Kubernetes Operator 1.10

1.13 1.12 1.11 1.10

Configuring the IPAM for GCP

NSX Advanced Load Balancer
 integrates with Google Cloud Platform (GCP) for providing IPAM services to applications running on instances in GCP. This section explains how to create a GCP profile and configure GCP IPAM.
Linux Server Cloud and GCP IPAM on GCP are not supported.

Prerequisites for GCP IPAM

  • Set up the Controller and SE instances on GCP.
  • Install
    NSX Advanced Load Balancer
     in a Linux Cloud. To use GCP as the IPAM provider, all the Controller and Service Engine instances must run in Google Cloud. The cloud type selected within
    NSX Advanced Load Balancer
     must be Linux Server Cloud. For more information, see Installing NSX Advanced Load Balancer in a Linux Server Cloud.
  • GCP uses a /32-based interface IP configuration. To support this, perform the following after configuring the Linux Server Cloud.
The CLI command is as follows:
configure serviceengineproperties
se_runtime_properties
se_handle_interface_routes

service_ip_subnets subnet/mask
save
save
Reload all the SEs for the configuration to take effect.
The
service_ip_subnets
 configuration optimizes the Docker routes on the SEs. If VIP allocation is done from multiple subnets, specify all of them.

Configuring GCP IPAM

Create and configure the GCP IPAM in
NSX Advanced Load Balancer
 as follows:
  1. Navigate to
    Templates
    Profiles
    IPAM/DNS Profiles
    .
  2. Click
    Create
    .
  3. Enter the IPAM Profile
    Name
    .
  4. Select
    Google Cloud Platform IPAM
     for
    Type
     as shown below.
Starting with
NSX Advanced Load Balancer
 22.1.3, the following UI is available:
You can create the IPAM profile in one of the following ways:
Option 1: Create a GCP cloud and select that cloud during creation of IPAM
As a prerequisite to creating a GCP IPAM, create a cloud named GCP Cloud, with the following inputs:
  • Service Engine Project ID - Project A (Project Name of the SEs)
  • Service Engine Region - Region A (Region Name of the SEs)
  • Zones
  • VPC Project ID
  • VPC Network Name
  • VPC Subnet Name
  • Cloud Storage Project ID
  • Cloud Storage Bucket Name
  1. In the
    NEW IPAM/DNS PROFILE
     screen, specify the profile name.
  2. Select
    Avi Vantage IPAM
     option from
    Type
     drop-down menu and select the previously created cloud –
    GCP Cloud
     – for the
    Cloud
     field.
  3. Add Usable Networks and click
    SAVE
    .
Option 2:
  1. Create a new GCP cloud or edit an existing cloud.
  2. Navigate to
    IPAM/DNS
     tab.
    1. In the
      IPAM Profile
       field, click the vertical ellipsis and then click
      Create
      .
  3. Configure the
    NEW IPAM/DNS PROFILE
     as shown in Option 1.
  4. Complete the Cloud configuration by clicking
    SAVE
     in the
    EDIT CLOUD
     screen.
You can configure GCP IPAM as follows:
  1. Navigate to
    Infrastructure
    Clouds
    .
  2. Select
    Default-Cloud
     and click the
    Edit
     icon.
  3. The IPAM that was created appears in the
    IPAM Profile
     drop-down menu. Select the
    IPAM Profile
    .
  4. Configure a Linux Server Cloud using the IP addresses for the Service Engine instances created.
GCP IPAM has been configured, and virtual services can now be provisioned.
  • On GCP only L3 scale out mode is supported for virtual services.
  • Some of the GCP zones might require the MTU to be lowered to 1400.
To set the MTU on the SEs, you can use the following CLI command:
configure serviceengineproperties
se_runtime_properties
global_mtu 1400
save
save
The MTU value will take effect after the SEs are rebooted.

Assigning Floating IP

You can assign floating IP using the following CLI command:
++Truncated Output++
+------------------------------------+-----------------------------------------------------+
[admin:10-146-43-2]: virtualservice> vip index 1
[admin:10-146-43-2]: virtualservice:vip> auto_allocate_floating_ip
Overwriting the previously entered value for auto_allocate_floating_ip
[admin:10-146-43-2]: virtualservice:vip> save
[admin:10-146-43-2]: virtualservice> save
++ Truncated Output++
Assigning floating IP is currently supported through the CLI only.

Auto-allocate Floating IP

All GCP resources will be created in the SEs project. Only auto-allocation of floating IP is supported.
++Truncated Output++
[2018-07-16 06:48:08,717] INFO [gcp_nlb.allocate_vip:63] old_vip_info: vip {
addr: "55.55.55.100"
type: V4
}
alloc_fip: false
|| new_vip_info: vip {
addr: "55.55.55.100"
type: V4
}
alloc_fip: true
You can also use
Swagger
 APIs to auto-allocate a floating IP through a
PUT
 request as follows:
"vip" : [ {
"availability_zone" : "aeiou",
"ip6_address" : "",
"subnet" : "",
"port_uuid" : "aeiou",
"subnet_uuid" : "aeiou",
"avi_allocated_vip" : true,
"vip_id" : "aeiou",
"ip_address" : "",
"auto_allocate_floating_ip" : true, *
"enabled" : true,
"floating_subnet6_uuid" : "aeiou",
"auto_allocate_ip" : true,
"subnet6" : "",
"floating_ip" : "",
"floating_subnet_uuid" : "aeiou",
"avi_allocated_fip" : true,
"subnet6_uuid" : "aeiou",
"floating_ip6" : "",
"ipam_network_subnet" : "",
"network_ref" : "aeiou",
"discovered_networks" : [ "" ]

Shared-VIP

Shared VIPs can be created on the same IP as shown in the image.

Configure GCP IPAM for Kubernetes/OpenShift

Kubernetes/OpenShift cloud is not supported in
NSX Advanced Load Balancer
.

Content feedback and comments