在组合的
vSphere Replication
设备上创建用于入站复制流量的虚拟机网络适配器

默认情况下,组合的
vSphere Replication
设备有一个虚拟机网络适配器。可以将第二个适配器添加到设备,并将
vSphere Replication
配置为仅将第二个适配器用于入站复制流量。
  • 验证
    vSphere Replication
    虚拟设备是否已部署并向
    vCenter Server
    注册。
  • 记下虚拟机网络适配器的 IP 地址。
用于
vSphere Replication
管理流量的 IP 地址为 localhost 127.0.0.1。默认虚拟机网络适配器由
vSphere Replication
服务器用于复制流量和管理附加复制服务器。使用以下过程将第二个适配器添加到
vSphere Replication
设备,以仅用于入站复制流量。
通过
VRMS 设备管理界面
进行 IP 配置仅支持为
vSphere Replication
设备配置一个默认网关。要在其他网卡上配置静态路由,请参见在其他虚拟机网络适配器上配置静态路由
  1. Power off the
    vSphere Replication
    appliance and edit the
    VM Hardware
    settings to add a new VM NIC.
    1. Right-click the VM and select
      Edit Settings
      .
    2. From the
      New Device
      drop-down menu at the bottom of the
      Virtual Hardware
      tab, click
      Network Adapter
      .
      The new network adapter appears in the list of devices at the right.
    3. Expand the properties of the new network adapter to verify that
      Connect At Power On
      is selected.
      You can assign a static MAC address or leave the text box empty to obtain an MAC address automatically.
    4. Click
      OK
      to close the Edit Setting dialog box.
  2. Power on the
    vSphere Replication
    appliance.
  3. vSphere Replication
    设备的
    摘要
    选项卡中,记下新网络适配器的 IP 地址。
    可以单击
    查看全部
    XX
    IP 地址
    以查看新网卡的 IP 地址。
  4. (可选)如果需要在新网卡上配置静态路由,请参见在其他虚拟机网络适配器上配置静态路由
  5. 使用受支持的浏览器登录到
    VRMS 设备管理界面
    VRMS 设备管理界面
    的 URL 为 https://
    vr-appliance-address
    :5480。
    打开
    vSphere Replication
    电源后,
    VRMS 设备管理界面
    地址可能会更改为新网络适配器的 IP 地址。
  6. 单击
    网络
    并确认此附加网卡已正确配置为 IPv4 或 IPv6。
  7. 重新启动
    vSphere Replication
    设备以在
    VRMS 设备管理界面
    中将此网卡状态更改为 UP。
    此新网卡现在可以获取并预留新的 IP 地址。
  8. 单击
    摘要
    ,然后单击
    更改
  9. 入站存储流量的 IP 地址
    文本框中,输入您添加的新网络适配器的 IP 地址,然后单击
    保存
vSphere Replication
设备将仅对入站复制流量使用所分配的 IP 地址。