결합된
vSphere Replication
장치에서 들어오는 복제 트래픽에 사용할 VM 네트워크 어댑터 생성

기본적으로 결합된
vSphere Replication
장치에는 VM 네트워크 어댑터가 하나 있습니다. 장치에 두 번째 어댑터를 추가하고 수신 복제 트래픽에만 두 번째 어댑터를 사용하도록
vSphere Replication
을 구성할 수 있습니다.
  • vSphere Replication
    가상 장치가 배포되었고
    vCenter Server
    에 등록되었는지 확인합니다.
  • VM 네트워크 어댑터의 IP 주소를 기록해 둡니다.
vSphere Replication
관리 트래픽에 사용되는 IP 주소는 localhost 127.0.0.1입니다. 기본 VM 네트워크 어댑터는
vSphere Replication
서버에서 복제 트래픽 및 추가 기능 복제 서버를 관리하는 데 사용됩니다. 다음 절차에 따라 수신 복제 트래픽 전용으로
vSphere Replication
장치에 두 번째 어댑터를 추가합니다.
VRMS Appliance Management Interface
를 통한 IP 구성은
vSphere Replication
장치에서 기본 게이트웨이를 하나만 지원합니다. 추가 NIC에서 정적 경로를 구성하려면 추가 VM 네트워크 어댑터에서 정적 경로 구성을 참조하십시오.
  1. Power off the
    vSphere Replication
    appliance and edit the
    VM Hardware
    settings to add a new VM NIC.
    1. Right-click the VM and select
      Edit Settings
      .
    2. From the
      New Device
      drop-down menu at the bottom of the
      Virtual Hardware
      tab, click
      Network Adapter
      .
      The new network adapter appears in the list of devices at the right.
    3. Expand the properties of the new network adapter to verify that
      Connect At Power On
      is selected.
      You can assign a static MAC address or leave the text box empty to obtain an MAC address automatically.
    4. Click
      OK
      to close the Edit Setting dialog box.
  2. Power on the
    vSphere Replication
    appliance.
  3. vSphere Replication
    장치의
    요약
    탭에서 새 네트워크 어댑터의 IP 주소를 적어 둡니다.
    모든
    XX
    IP 주소 보기
    를 클릭하여 새 NIC의 IP 주소를 볼 수 있습니다.
  4. (선택 사항) 새 NIC에서 정적 경로를 구성해야 하는 경우 추가 VM 네트워크 어댑터에서 정적 경로 구성을 참조하십시오.
  5. 지원되는 브라우저를 사용하여
    VRMS Appliance Management Interface
    에 로그인합니다.
    VRMS Appliance Management Interface
    의 URL은 https://
    vr-appliance-address
    :5480입니다.
    vSphere Replication
    의 전원을 켠 후
    VRMS Appliance Management Interface
    주소가 새 네트워크 어댑터의 IP 주소로 변경될 수 있습니다.
  6. 네트워킹
    을 클릭하고 추가 NIC가 IPv4 또는 IPv6로 올바르게 구성되었는지 확인합니다.
  7. vSphere Replication
    장치를 다시 시작하여
    VRMS Appliance Management Interface
    에서 NIC 상태를 UP으로 변경합니다.
    이제 새 NIC에서 새 IP 주소를 가져오고 예약할 수 있습니다.
  8. 요약
    을 클릭한 다음
    변경
    을 클릭합니다.
  9. 추가한 새 네트워크 어댑터의 IP 주소를
    들어오는 스토리지 트래픽의 IP 주소
    텍스트 상자에 입력하고
    저장
    을 클릭합니다.
수신 복제 트래픽 전용으로 할당한 IP 주소가
vSphere Replication
장치에 사용됩니다.