The PXF object store connectors support plain delimited and comma-separated value format text data. This section describes how to use PXF to access text data in an object store, including how to create, query, and insert data into an external table that references files in the object store.

Note: Accessing text data from an object store is very similar to accessing text data in HDFS.

Prerequisites

Ensure that you have met the PXF Object Store Prerequisites before you attempt to read data from or write data to an object store.

Reading Text Data

Use the <objstore>:text profile when you read plain text delimited and <objstore>:csv when reading .csv data from an object store where each row is a single record. PXF supports the following <objstore> profile prefixes:

The following syntax creates a Greenplum Database readable external table that references a simple text file in an object store: 

CREATE EXTERNAL TABLE <table_name> 
    ( <column_name> <data_type> [, ...] | LIKE <other_table> )
LOCATION ('pxf://<path-to-file>?PROFILE=<objstore>:text|csv&SERVER=<server_name>[&IGNORE_MISSING_PATH=<boolean>][&SKIP_HEADER_COUNT=<numlines>][&<custom-option>=<value>[...]]')
FORMAT '[TEXT|CSV]' (delimiter[=|<space>][E]'<delim_value>');

The specific keywords and values used in the Greenplum Database CREATE EXTERNAL TABLE command are described in the table below.

Note: PXF does not support the (HEADER) formatter option in the CREATE EXTERNAL TABLE command. If your text file includes header line(s), use SKIP_HEADER_COUNT to specify the number of lines that PXF should skip at the beginning of the first split of each file.

If you are accessing an S3 object store:

• You can provide S3 credentials via custom options in the CREATE EXTERNAL TABLE command as described in Overriding the S3 Server Configuration with DDL.

• If you are reading CSV-format data from S3, you can direct PXF to use the S3 Select Amazon service to retrieve the data. Refer to Using the Amazon S3 Select Service for more information about the PXF custom option used for this purpose.

Example: Reading Text Data from S3

Perform the following procedure to create a sample text file, copy the file to S3, and use the s3:text and s3:csv profiles to create two PXF external tables to query the data.

To run this example, you must:

• Have the AWS CLI tools installed on your system
• Know your AWS access ID and secret key

• Have write permission to an S3 bucket

• Create a directory in S3 for PXF example data files. For example, if you have write access to an S3 bucket named BUCKET:

  $ aws s3 mb s3://BUCKET/pxf_examples
  

• Locally create a delimited plain text data file named pxf_s3_simple.txt:

  $ echo 'Prague,Jan,101,4875.33
  Rome,Mar,87,1557.39
  Bangalore,May,317,8936.99
  Beijing,Jul,411,11600.67' > /tmp/pxf_s3_simple.txt
  

  Note the use of the comma (,) to separate the four data fields.

• Copy the data file to the S3 directory you created in Step 1:

  $ aws s3 cp /tmp/pxf_s3_simple.txt s3://BUCKET/pxf_examples/
  

• Verify that the file now resides in S3:

  $ aws s3 ls s3://BUCKET/pxf_examples/pxf_s3_simple.txt
  

• Start the psql subsystem:

  $ psql -d postgres
  

• Use the PXF s3:text profile to create a Greenplum Database external table that references the pxf_s3_simple.txt file that you just created and added to S3. For example, if your server name is s3srvcfg:

  postgres=# CREATE EXTERNAL TABLE pxf_s3_textsimple(location text, month text, num_orders int, total_sales float8)
              LOCATION ('pxf://BUCKET/pxf_examples/pxf_s3_simple.txt?PROFILE=s3:text&SERVER=s3srvcfg')
            FORMAT 'TEXT' (delimiter=E',');
  

• Query the external table:

  postgres=# SELECT * FROM pxf_s3_textsimple;          
  

     location    | month | num_orders | total_sales 
  ---------------+-------+------------+-------------
   Prague        | Jan   |        101 |     4875.33
   Rome          | Mar   |         87 |     1557.39
   Bangalore     | May   |        317 |     8936.99
   Beijing       | Jul   |        411 |    11600.67
  (4 rows)
  

• Create a second external table that references pxf_s3_simple.txt, this time specifying the s3:csv PROFILE and the CSV FORMAT:

  postgres=# CREATE EXTERNAL TABLE pxf_s3_textsimple_csv(location text, month text, num_orders int, total_sales float8)
              LOCATION ('pxf://BUCKET/pxf_examples/pxf_s3_simple.txt?PROFILE=s3:csv&SERVER=s3srvcfg')
            FORMAT 'CSV';
  postgres=# SELECT * FROM pxf_s3_textsimple_csv;          
  

  When you specify FORMAT 'CSV' for comma-separated value data, no delimiter formatter option is required because comma is the default delimiter value.

Reading Text Data with Quoted Linefeeds

Use the <objstore>:text:multi profile to read plain text data with delimited single- or multi- line records that include embedded (quoted) linefeed characters. The following syntax creates a Greenplum Database readable external table that references such a text file in an object store:

CREATE EXTERNAL TABLE <table_name>
    ( <column_name> <data_type> [, ...] | LIKE <other_table> )
LOCATION ('pxf://<path-to-file>?PROFILE=<objstore>:text:multi&SERVER=<server_name>[&IGNORE_MISSING_PATH=<boolean>][&SKIP_HEADER_COUNT=<numlines>][&<custom-option>=<value>[...]]')
FORMAT '[TEXT|CSV]' (delimiter[=|<space>][E]'<delim_value>');

The specific keywords and values used in the CREATE EXTERNAL TABLE command are described in the table below.

Note: PXF does not support the (HEADER) formatter option in the CREATE EXTERNAL TABLE command. If your text file includes header line(s), use SKIP_HEADER_COUNT to specify the number of lines that PXF should skip at the beginning of the first split of each file.

If you are accessing an S3 object store, you can provide S3 credentials via custom options in the CREATE EXTERNAL TABLE command as described in Overriding the S3 Server Configuration with DDL.

Example: Reading Multi-Line Text Data from S3

Perform the following steps to create a sample text file, copy the file to S3, and use the PXF s3:text:multi profile to create a Greenplum Database readable external table to query the data.

To run this example, you must:

• Have the AWS CLI tools installed on your system
• Know your AWS access ID and secret key

• Have write permission to an S3 bucket

• Create a second delimited plain text file:

  $ vi /tmp/pxf_s3_multi.txt
  

• Copy/paste the following data into pxf_s3_multi.txt:

  "4627 Star Rd.
  San Francisco, CA  94107":Sept:2017
  "113 Moon St.
  San Diego, CA  92093":Jan:2018
  "51 Belt Ct.
  Denver, CO  90123":Dec:2016
  "93114 Radial Rd.
  Chicago, IL  60605":Jul:2017
  "7301 Brookview Ave.
  Columbus, OH  43213":Dec:2018
  

  Notice the use of the colon : to separate the three fields. Also notice the quotes around the first (address) field. This field includes an embedded line feed separating the street address from the city and state.

• Copy the text file to S3:

  $ aws s3 cp /tmp/pxf_s3_multi.txt s3://BUCKET/pxf_examples/
  

• Use the s3:text:multi profile to create an external table that references the pxf_s3_multi.txt S3 file, making sure to identify the : (colon) as the field separator. For example, if your server name is s3srvcfg:

  postgres=# CREATE EXTERNAL TABLE pxf_s3_textmulti(address text, month text, year int)
              LOCATION ('pxf://BUCKET/pxf_examples/pxf_s3_multi.txt?PROFILE=s3:text:multi&SERVER=s3srvcfg')
            FORMAT 'CSV' (delimiter ':');
  

  Notice the alternate syntax for specifying the delimiter.

• Query the pxf_s3_textmulti table:

  postgres=# SELECT * FROM pxf_s3_textmulti;
  

           address          | month | year 
  --------------------------+-------+------
   4627 Star Rd.            | Sept  | 2017
   San Francisco, CA  94107           
   113 Moon St.             | Jan   | 2018
   San Diego, CA  92093               
   51 Belt Ct.              | Dec   | 2016
   Denver, CO  90123                  
   93114 Radial Rd.         | Jul   | 2017
   Chicago, IL  60605                 
   7301 Brookview Ave.      | Dec   | 2018
   Columbus, OH  43213                
  (5 rows)
  

Writing Text Data

The <objstore>:text|csv profiles support writing single line plain text data to an object store. When you create a writable external table with PXF, you specify the name of a directory. When you insert records into a writable external table, the block(s) of data that you insert are written to one or more files in the directory that you specified.

Note: External tables that you create with a writable profile can only be used for INSERT operations. If you want to query the data that you inserted, you must create a separate readable external table that references the directory.

Use the following syntax to create a Greenplum Database writable external table that references an object store directory: 

CREATE WRITABLE EXTERNAL TABLE <table_name> 
    ( <column_name> <data_type> [, ...] | LIKE <other_table> )
LOCATION ('pxf://<path-to-dir>
    ?PROFILE=<objstore>:text|csv&SERVER=<server_name>[&<custom-option>=<value>[...]]')
FORMAT '[TEXT|CSV]' (delimiter[=|<space>][E]'<delim_value>');
[DISTRIBUTED BY (<column_name> [, ... ] ) | DISTRIBUTED RANDOMLY];

The specific keywords and values used in the CREATE EXTERNAL TABLE command are described in the table below.

Writable external tables that you create using an <objstore>:text|csv profile can optionally use record or block compression. You specify the compression codec via a custom option in the CREATE EXTERNAL TABLE LOCATION clause. The <objstore>:text|csv profiles support the following custom write options:

If you are accessing an S3 object store, you can provide S3 credentials via custom options in the CREATE EXTERNAL TABLE command as described in Overriding the S3 Server Configuration with DDL.

Example: Writing Text Data to S3

This example utilizes the data schema introduced in Example: Reading Text Data from S3.

This example also optionally uses the Greenplum Database external table named pxf_s3_textsimple that you created in that exercise.

Procedure

Perform the following procedure to create Greenplum Database writable external tables utilizing the same data schema as described above, one of which will employ compression. You will use the PXF s3:text profile to write data to S3. You will also create a separate, readable external table to read the data that you wrote to S3.

1. Create a Greenplum Database writable external table utilizing the data schema described above. Write to the S3 directory BUCKET/pxf_examples/pxfwrite_s3_textsimple1. Create the table specifying a comma (,) as the delimiter. For example, if your server name is s3srvcfg:

   postgres=# CREATE WRITABLE EXTERNAL TABLE pxf_s3_writetbl_1(location text, month text, num_orders int, total_sales float8)
               LOCATION ('pxf://BUCKET/pxf_examples/pxfwrite_s3_textsimple1?PROFILE=s3:text|csv&SERVER=s3srvcfg')
             FORMAT 'TEXT' (delimiter=',');
   

   You specify the FORMAT subclause delimiter value as the single ascii comma character ,.

2. Write a few individual records to the pxfwrite_s3_textsimple1 S3 directory by invoking the SQL INSERT command on pxf_s3_writetbl_1:

   postgres=# INSERT INTO pxf_s3_writetbl_1 VALUES ( 'Frankfurt', 'Mar', 777, 3956.98 );
   postgres=# INSERT INTO pxf_s3_writetbl_1 VALUES ( 'Cleveland', 'Oct', 3812, 96645.37 );
   

3. (Optional) Insert the data from the pxf_s3_textsimple table that you created in [Example: Reading Text Data from S3] (#profile_text_query) into pxf_s3_writetbl_1:

   postgres=# INSERT INTO pxf_s3_writetbl_1 SELECT * FROM pxf_s3_textsimple;
   

4. Greenplum Database does not support directly querying a writable external table. To query the data that you just added to S3, you must create a readable external Greenplum Database table that references the S3 directory:

   postgres=# CREATE EXTERNAL TABLE pxf_s3_textsimple_r1(location text, month text, num_orders int, total_sales float8)
               LOCATION ('pxf://BUCKET/pxf_examples/pxfwrite_s3_textsimple1?PROFILE=s3:text&SERVER=s3srvcfg')
   		    FORMAT 'CSV';
   

   You specify the 'CSV' FORMAT when you create the readable external table because you created the writable table with a comma (,) as the delimiter character, the default delimiter for 'CSV' FORMAT.

5. Query the readable external table:

   postgres=# SELECT * FROM pxf_s3_textsimple_r1 ORDER BY total_sales;
   

    location  | month | num_orders | total_sales 
   -----------+-------+------------+-------------
    Rome      | Mar   |         87 |     1557.39
    Frankfurt | Mar   |        777 |     3956.98
    Prague    | Jan   |        101 |     4875.33
    Bangalore | May   |        317 |     8936.99
    Beijing   | Jul   |        411 |    11600.67
    Cleveland | Oct   |       3812 |    96645.37
   (6 rows)
   

   The pxf_s3_textsimple_r1 table includes the records you individually inserted, as well as the full contents of the pxf_s3_textsimple table if you performed the optional step.

6. Create a second Greenplum Database writable external table, this time using Gzip compression and employing a colon : as the delimiter:

   postgres=# CREATE WRITABLE EXTERNAL TABLE pxf_s3_writetbl_2 (location text, month text, num_orders int, total_sales float8)
               LOCATION ('pxf://BUCKET/pxf_examples/pxfwrite_s3_textsimple2?PROFILE=s3:text&SERVER=s3srvcfg&COMPRESSION_CODEC=gzip')
             FORMAT 'TEXT' (delimiter=':');
   

7. Write a few records to the pxfwrite_s3_textsimple2 S3 directory by inserting directly into the pxf_s3_writetbl_2 table:

   gpadmin=# INSERT INTO pxf_s3_writetbl_2 VALUES ( 'Frankfurt', 'Mar', 777, 3956.98 );
   gpadmin=# INSERT INTO pxf_s3_writetbl_2 VALUES ( 'Cleveland', 'Oct', 3812, 96645.37 );
   

8. To query data from the newly-created S3 directory named pxfwrite_s3_textsimple2, you can create a readable external Greenplum Database table as described above that references this S3 directory and specifies FORMAT 'CSV' (delimiter=':').

About Reading Data Containing Multi-Byte or Multi-Character Delimiters

You can use only a *:csv PXF profile to read data from an object store that contains a multi-byte delimiter or a delimiter with multiple characters. The syntax for creating a readable external table for such data follows:

CREATE EXTERNAL TABLE <table_name>
    ( <column_name> <data_type> [, ...] | LIKE <other_table> )
LOCATION ('pxf://<path-to-file>?PROFILE=<objstore>:csv[&SERVER=<server_name>][&IGNORE_MISSING_PATH=<boolean>][&SKIP_HEADER_COUNT=<numlines>][&NEWLINE=<bytecode>]')
FORMAT 'CUSTOM' (FORMATTER='pxfdelimited_import' <option>[=|<space>][E]'<value>');

Note the FORMAT line in the syntax block. While the syntax is similar to that of reading CSV, PXF requires a custom formatter to read data containing a multi-byte or multi-character delimiter. You must specify the 'CUSTOM' format and the pxfdelimited_import formatter. You must also specify a delimiter in the formatter options.

PXF recognizes the following formatter options when reading data from an object store that contains a multi-byte or multi-character delimiter:

The following sections provide further information about, and examples for, specifying the delimiter, quote, escape, and new line options.

Specifying the Delimiter

You must directly specify the delimiter or provide its byte representation. For example, given the following sample data that uses a ¤ currency symbol delimiter:

133¤Austin¤USA
321¤Boston¤USA
987¤Paris¤France

To read this data from S3 using a PXF server configuration named s3srvcfg, create the external table as follows:

CREATE READABLE EXTERNAL TABLE s3_mbyte_delim (id int, city text, country text)
  LOCATION ('pxf://multibyte_currency?PROFILE=s3:csv&SERVER=s3srvcfg')
FORMAT 'CUSTOM' (FORMATTER='pxfdelimited_import', DELIMITER='¤'); 

About Specifying the Byte Representation of the Delimiter

You can directly specify the delimiter or provide its byte representation. If you choose to specify the byte representation of the delimiter:

• You must specify the byte representation of the delimiter in E'<value>' format.
• Because some characters have different byte representations in different encodings, you must specify the byte representation of the delimiter in the database encoding.

For example, if the database encoding is UTF8, the file encoding is LATIN1, and the delimiter is the ¤ currency symbol, you must specify the UTF8 byte representation for ¤, which is \xC2\xA4:

CREATE READABLE EXTERNAL TABLE s3_byterep_delim (id int, city text, country text)
  LOCATION ('pxf://multibyte_example?PROFILE=s3:csv&SERVER=s3srvcfg')
FORMAT 'CUSTOM' (FORMATTER='pxfdelimited_import', DELIMITER=E'\xC2\xA4') ENCODING 'LATIN1';

About Specifying Quote and Escape Characters

When PXF reads data that contains a multi-byte or multi-character delimiter, its behavior depends on the quote and escape character settings:

¹ All data columns must be un-quoted when you do not specify a quote character.

² All data columns must quoted when you specify a quote character.

PXF expects that there are no extraneous characters between the quote value and the delimiter value, nor between the quote value and the end-of-line value. Additionally, there must be no white space between delimiters and quotes.

About the NEWLINE Options

PXF requires that every line in the file be terminated with the same new line value.

By default, PXF uses the line feed character (LF) for the new line delimiter. When the new line delimiter for the external file is also a line feed, you need not specify the NEWLINE formatter option.

If the NEWLINE formatter option is provided and contains CR or CRLF, you must also specify the same NEWLINE option in the external table LOCATION URI. For example, if the new line delimiter is CRLF, create the external table as follows:

CREATE READABLE EXTERNAL TABLE s3_mbyte_newline_crlf (id int, city text, country text)
  LOCATION ('pxf://multibyte_example_crlf?PROFILE=s3:csv&SERVER=s3srvcfg&NEWLINE=CRLF')
FORMAT 'CUSTOM' (FORMATTER='pxfdelimited_import', DELIMITER='¤', NEWLINE='CRLF');

Examples

Delimiter with Quoted Data

Given the following sample data that uses the double-quote (") quote character and the delimiter ¤:

"133"¤"Austin"¤"USA"
"321"¤"Boston"¤"USA"
"987"¤"Paris"¤"France"

Create the external table as follows:

CREATE READABLE EXTERNAL TABLE s3_mbyte_delim_quoted (id int, city text, country text)
  LOCATION ('pxf://multibyte_q?PROFILE=s3:csv&SERVER=s3srvcfg')
FORMAT 'CUSTOM' (FORMATTER='pxfdelimited_import', DELIMITER='¤', QUOTE '"'); 

Delimiter with Quoted and Escaped Data

Given the following sample data that uses the quote character ", the escape character \, and the delimiter ¤:

"\"hello, my name is jane\" she said. let's escape something \"¤"123"

Create the external table as follows:

CREATE READABLE EXTERNAL TABLE s3_mybte_delim_quoted_escaped (sentence text, num int)
  LOCATION ('pxf://multibyte_qe?PROFILE=s3:csv&SERVER=s3srvcfg')
FORMAT 'CUSTOM' (FORMATTER='pxfdelimited_import', DELIMITER='¤', QUOTE '"', ESCAPE '\');

With this external table definition, PXF reads the sentence text field as:

SELECT sentence FROM s3_mbyte_delim_quoted_escaped;

                          sentence 
-------------------------------------------------------------
 "hello, my name is jane" she said. let's escape something \
(1 row)